 |
|
|
Model AA:
High Pressure Liquid Metering Pumps |
|
Download
pdf brochure
|
|
 |
1.
|
Flow rates between 0.2
to 10 mL/min. with reciprocating piston design |
| 2.
|
High
pressure capabilities, to 5000 psi. |
| 3.
|
Corrosion resistant
materials |
|
|
|
|
Two
Basic Models |
|
|
|
There are two different models based on the
same Model AA construction. Each covers a specific flow and pressure
range. If possible, choose a model you will use in the upper range
of its flow rate capacity.
|
|
|
|
For a listing of Model AA pumps which run off
230VAC, click on
Model AA 230VAC.
|
|
|
|
Three
Materials of Construction |
|
|
|
Most Model AA pumps are available using three
different materials of construction; type 316 stainless steel, CTFE, and
PEEK.
|
|
|
|
To choose your pump, use the
charts below to locate the desired materials of construction, then locate
the model you will typically use in the upper range of its capacity (if
possible). |
|
|
|
Basic
Specifications: |
|
|
|
|
316 stainless steel |
Flow
Rate* |
Max.
Pressure (psi) |
Cam
shaft rpm |
Piston Diameter
(in) |
Max. Piston stroke |
Model |
Order
No. |
| 0.2 - 6.0 |
5000 |
60 |
.125 |
.250 |
AA-60-S |
1474 |
| 0.2 - 10.0 |
5000 |
100 |
.125 |
.250 |
AA-100-S |
1018 |
|
|
|
|
|
PEEK |
Flow
Rate* |
Max.
Pressure (psi) |
Cam
shaft rpm |
Piston Diameter
(in) |
Max. Piston stroke |
Model |
Order
No. |
| 0.2 - 6.0 |
4000 |
60 |
.125 |
.250 |
AA-60-S-PK |
1475 |
| 0.2 - 10.0 |
4000 |
100 |
.125 |
.250 |
AA-100-S-PK |
1293 |
|
|
|
|
|
CTFE |
Flow
Rate* |
Max.
Pressure (psi) |
Cam
shaft rpm |
Piston Diameter
(in) |
Max. Piston stroke |
Model |
Order
No. |
| 0.2 - 10.0 |
2000 |
100 |
.125 |
.250 |
AA-100-SF |
1156 |
|
|
|
|
*Maximum flow rate specifications are based on
theoretical volume displacement; actual flow rates will vary depending on
such factors as fluid viscosity, compressibility and temperature.
Minimum flow rates are stated per channel, maximum flow rates are stated
with combined channels.
|
|
|
|
Common
Specifications |
|
|
|
|
|
Wetted
Parts: |
|
|
|
|
For
316: type 316 stainless
steel, sapphire, ruby, gold, uhmw polyethylene, CTFE. |
|
For
PEEK: PEEK, sapphire,
ruby, uhmw polyethylene, inert polymers. |
|
For CTFE:
CTFE, sapphire, ruby,
gold, uhmw polyethylene.
|
|
|
|
|
Reproducibility:
typically ±0.3%
|
|
|
|
|
Viscosity
Limit: 500 centipoise
|
|
|
|
Tubing
Connections:
|
|
|
|
|
Inlet valves: 1/4"-28 low
pressure
plastic fitting for use with 1/8" plastic tubing (fitting and 60cm of
tubing provided with pump).
|
|
Outlet valves for
316: 10-32
tube nut, ferrule for use with 1/16" tubing (tube nut and ferrule
provided with pump). |
|
Outlet valves for
PEEK: 1/4"-28 plastic fittings for use with 1/16" tubing (tube nut and
ferrule provided with pump). |
|
Outlet valves for
CTFE:
1/4"-28 low pressure plastic fittings for use with 1/8" tubing
(plastic fitting provided with pump).
|
|
Valves with special fittings available on
request.
|
|
|
|
Dimensions
(DxWxH): 18.5 cm x 25 cm x
14.5 cm (7.3 in x 9.8 in x 5.7 in)
|
|
|
|
Weight:
5.4 kg (12 lbs)
|
|
|
|
Electrical:
|
|
|
|
|
Voltage/Frequency:
115VAC/60Hz
|
|
VA rating: 60
|
|
Fuse: 1 A
|
|
|
|
Motor:
Motor: brushless, AC Synchronous,
TENV (totally enclosed non ventilated).
|
|
|
|
|
Options:
|
|
|
|
|
Piston Wash Kit
|
|
|
|
|
P/N 5575: Can
be mounted to any Model A pump and can significantly extend piston
seal life. Click on Pump Options for more details.
|
|
|
|
Quick Connect Kit
|
|
|
|
|
P/N 5728: Can
be mounted to any Model A pump and simplifies removal and
installation of the liquid end assembly. Click on Pump Options
for more details.
|
|
|
|
Other Options
|
|
|
|
|
Other pump options include
special piston seals or valve connections.
|
|
|
|
|
Suggested
Spare
Parts/Accessories:
|
|
|
|
|
316 stainless steel |
Order No. |
Description |
| |
Preventive Maintenance
Kits |
| 1388 |
Includes two uhmw
polyethylene seals, backup washers, tools for installation, two
valve cartridges, one retainer, a 10 micron sintered stainless steel
filter, and tube of lubrication oil. |
|
or |
|
| 1389 |
Includes two graphite
fiber reinforced PTFE piston seals, tools for installation, two
valve cartridges, one retainer, a 10 micron sintered stainless steel
filter, and tube of lubrication oil. |
| |
Manifolds |
| 1040 |
High Pressure outlet
manifold for parallel operation of both channels on AA pumps. |
|
|
|
|
|
PEEK |
Order No. |
Description |
| |
Preventive Maintenance
Kits |
| 1479 |
Includes two uhmw
polyethylene seals, backup washers, tools for installation, two
valve cartridges, one retainer, a 10 micron plastic filter, and tube
of lubrication oil. |
|
|
|
|
|
CTFE |
Order No. |
Description |
| |
Preventive Maintenance
Kits |
| 1388 |
Includes two uhmw
polyethylene seals, backup washers, tools for installation, two
valve cartridges, one retainer, a 10 micron sintered stainless steel
filter, and tube of lubrication oil. |
| or |
|
| 1389 |
Includes two graphite
fiber reinforced PTFE piston seals, tools for installation, two
valve cartridges, one retainer, a 10 micron sintered stainless steel
filter, and tube of lubrication oil. |
|
|
|
|
Click Model AA Parts
for a complete list of spare parts.
|
|
Back
to Top |
|
|
|
| Eldex |
|
|
|
|
Eldex
Laboratories, Inc. |
Telephone: |
(707)
224-8800 |
|
30 Executive
Court |
|
(800)
969-3533 |
|
Napa, CA
94558-6278 |
Fax: |
(707)
224-0688 |
|
USA |
email: |
sales@eldex.com |
|
 |
©Eldex Laboratories,
Inc. |
