HP Series pumps offer precise metering at high pressure.
Model AA-117-2 CE:
- Flow rate 0.25 – 11 mL/min
- Maximum pressure 5000 psi
- Material of construction 316SS
- Electrical 230V/50Hz.
Other materials:
Wetted Parts:
- For 316: type 316 stainless steel, sapphire, ruby, gold, UHMW polyethylene, CTFE.
- For PEEK: PEEK, sapphire, ruby, UHMW polyethylene, inert polymers.
Reproducibility: typically ±0.3%
Viscosity Limit: 500 centipoise
Tubing Connections:
- Inlet valves: 1/4″-28 low pressure plastic fitting for use with 1/8″ plastic tubing (fitting and 60cm of tubing provided with pump).
- Outlet valves for 316: 10-32 tube nut, ferrule for use with 1/16″ tubing (tube nut and ferrule provided with pump).
- Outlet valves for PEEK: 1/4″-28 plastic fittings for use with 1/16″ tubing (tube nut and ferrule provided with pump).
- Valves with special fittings available on request.
Motor: brushless, AC Synchronous, TENV (totally enclosed non ventilated).
*Maximum flow rate specifications are based on theoretical volume displacement; actual flow rates will vary depending on such factors as fluid viscosity, compressibility and temperature.
Download product brochures and documentation from our Support page.
