B-100-S-PK

Wetted Parts:

• For 316: type 316 stainless steel, sapphire, ruby, gold, UHMW polyethylene, CTFE.
• For PEEK: PEEK, sapphire, ruby, UHMW polyethylene, inert polymers.
• For CTFE: CTFE, sapphire, ruby, gold, UHMW polyethylene.

Reproducibility: typically ±0.3%

Viscosity Limit: 500 centipoise

Tubing Connections:

• Inlet valves: 1/4″-28 low pressure plastic fitting for use with 1/8″ plastic tubing (fitting and 60cm of tubing provided with pump).
• Outlet valves for 316: 10-32 tube nut, ferrule for use with 1/16″ tubing (tube nut and ferrule provided with pump).
• Outlet valves for PEEK: 1/4″-28 plastic fittings for use with 1/16″ tubing (tube nut and ferrule provided with pump).
• Outlet valves for CTFE: 1/4″-28 low pressure plastic fittings for use with 1/8″ tubing (plastic fitting provided with pump).
• Valves with special fittings available on request.

Dimensions (DxWxH): 21 cm x 19 cm x 16 cm (8.25 in x 7.5 in x 6.3 in)

Weight: 5 kg (11 lbs)

Electrical:

• Voltage/Frequency: 115VAC/60Hz
• VA rating: 60
• Fuse: 1 A

Motor: brushless, AC Synchronous, TENV (totally enclosed non ventilated).

*Maximum flow rate specifications are based on theoretical volume displacement; actual flow rates will vary depending on such factors as fluid viscosity, compressibility and temperature.

Pump Options

#5575: Piston Wash Kit; includes piston.

#5728: Quick Connect Kit.

Preventive Maintenance Kits

#1479: Includes two UHMW polyethylene seals, tools for installation, two valve cartridges, one retainer, a 10 micron plastic filter, and tube of lubrication oil.

Piston Seals

#1476: Piston seal assembly kit; includes one UHMW polyethylene metal-free seal, and tools for installation.

#1477: Piston seal replacement kit; includes two UHMW polyethylene metal-free seals.

#1478: Piston seal replacement kit; includes five UHMW polyethylene metal-free seals.

#1272: Piston seal assembly kit (for non-grooved cylinders, old-style); includes one UHMW polyethylene metal-free seal, backup washer, and tools for installation.

#1273: Piston seal replacement kit (for non-grooved cylinders, old-style); includes two UHMW polyethylene metal-free seals, backup washers.

#1274: Piston seal replacement kit (for non-grooved cylinders, old-style); includes five UHMW polyethylene metal-free seals, backup washers.

Valves

#1377: Inlet valve assembly, cartridge style.

#1378: Outlet valve assembly, cartridge style.

#1383: Valve cartridge kit (rebuilds one inlet or one outlet valve).

Pistons

#1366: 1/8″ sapphire piston.

#5576: 1/8″ sapphire piston for pumps with wash kit.

Liquid End Assembly

#1439: Includes inlet and outlet valve assemblies, cylinder, piston seals and retainer. Piston not included.

Fittings

#1280: Includes 60 cm of 1/8″ Teflon inlet tubing, inlet (1/4-28) and outlet (1/4-28) tube nuts, and outlet ferrule.

Filter

#1279: 10 micron plastic filter, with 60 cm long Teflon inlet tube and tube nut.

Other Parts

#1365: Retainer assembly.

For other parts, consult factory

Download product brochures and documentation from our Support page.