Overview Specifications » Parts »
-
Flow rates between 0.2 to 10 mL/min. with reciprocating piston design
-
High pressure capabilities, to 5000 psi.
-
Corrosion resistant materials.
Pumps with a "CE" in the Model description are CE certified (for export to the European Community).
Three Materials of Construction
Most Model AA pumps are available using three different materials of construction; type 316 stainless steel, and PEEK.
To choose your pump, use the charts below to locate the desired materials of construction, then locate the model you will typically use in the upper range of its capacity (if possible).
Basic Specifications:
| 316 stainless steel | Flow Rate* | Max. Pressure (psi) | Cam shaft rpm | Piston Diameter (in) | Max. Piston stroke | Model |
|---|---|---|---|---|---|---|
| 0.2 - 10.0 | 5000 | 100 | .125 | .250 | AA-100-S-2 CE |
| PEEK | Flow Rate* | Max. Pressure (psi) | Cam shaft rpm | Piston Diameter (in) | Max. Piston stroke | Model |
|---|---|---|---|---|---|---|
| 0.2 - 10.0 | 4000 | 100 | .125 | .250 | AA-100-S-PK-2 CE |
*Maximum flow rate specifications are based on theoretical volume displacement; actual flow rates will vary depending on such factors as fluid viscosity, compressibility and temperature. Minimum flow rates are stated per channel, maximum flow rates are stated with combined channels.
Ordering Information
| Order No. | Description |
|---|---|
| 1444 | Model AA-100-S-2 CE |
| 1453 | Model AA-100-S-PK-2 CE |
Overview Specifications » Parts »