Flow rates between 0.003 to 5 mL/min. with reciprocating piston design.
High Pressure capabilities, to 4000 psi.
Corrosion resistant materials.
Optos Series metering pumps can be used wherever precise flow rate control, particularly at high pressures, is required.
Wide Flow Ranges
We manufacture a wide range of Optos Series pumps grouped into three pump models. We can also customize our designs to meet your specific requirements.
Reciprocating Piston Design
All Eldex Optos metering pumps are based on a positive displacement, reciprocating piston design, which gives you precise flow control. Various models cover flow rates from 0.002 to 80 mL/min.
40 Plus Years of Experience
Eldex's Optos Series incorporates knowledge gained from over 40 years of experience in designing and manufacturing reciprocating piston pumps for a wide variety of applications, while integrating the latest technology and electronics.
Optos pumps are designed and ideally suited for numerous applications, including:
- Reactant/chemical feed
- Column washing
- Pilot plant
- Post column reaction
- Flow injection analysis
Versatile, Easy to Use
The Optos pump provides a simple interface for ease of control over flow rates, refill rates, compressibility compensation and other pump parameters.
Convenient Control Options
The Optos pump can be controlled from either the local LCD display and membrane keypad, or remotely, using either RS232 commands or analog controls (either 0-5VDC or 4-20mA).
The materials in the liquid end of the Optos Series pumps are carefully chosen for corrosion resistance. The piston is sapphire, and the inlet and outlet valves incorporate sapphire seats and ruby balls.
The use of buffers or solutions which crystallize when exposed to air can lead to abrasion of the piston seal. A fully integrated piston wash system is included in the Optos pumps, dramatically extending piston seal life.
Simple, robust construction
The Optos Series pump, only four inches wide, occupies very little bench space. The design is simplified for optimal reliability. With our extensive experience in reciprocating pump technology, no effort has been spared to make the most durable pump available.
Upgrade to Plus: Minimize Pulsation, Monitor Pressure
Plus versions of Optos Series pumps come with an integrated pulse damper to further reduce pulsation, and the ability to monitor pressure and set high and low pressure limits. For the Plus version of this model, click on 1SIP.
Option: Three Interchangeable Pump Heads
To maximize the versatility of the Model 1SI Optos pump, two additional different liquid end assemblies are available. Each interchangeable liquid end provides specific flow rates and pressure capabilities and can be changed in a matter of minutes.
The Model 1SI comes with a 1/8" piston and pump head. The optional heads use 3/32" or 1/4" pistons and pump heads. To purchase the optional 3/32" parts, order P/N 5819 (piston) and P/N 5905 (pump head). To purchase the optional 1/4" parts, order P/N 5821 (piston) and P/N 5907 (pump head).
Option: Stainless Steel
Optos Series metering pumps can be made with stainless steel liquid end assemblies, as opposed to the usual PEEK. For the stainless steel version of this model, click on 1SM.