HP Series pumps offer precise metering at high pressure.
Model BBB-4 VS:
- Flow rate 12.0 – 144.0 mL/min
- Maximum pressure 5000 psi
- Material of construction 316SS
- Electrical 115V/50-60Hz
- Remote control operation
Wetted Parts: For 316: type 316 stainless steel, sapphire, ruby, gold, uhmw polyethylene, CTFE.
Reproducibility: typically ±0.3%
Viscosity Limit: 500 centipoise
- Inlet valves: 1/8″ Swagelok style
- Outlet valves: 1/8″ Swagelok style
- Valves with special fittings available on request.
Controller Dimensions (DxWxH): 21.4 cm x 15.6 cm x 10 cm (8.4 in x 6.2 in x 4 in )
Pump Dimensions (DxWxH): 32 cm x 23.5 cm x 13.4 cm (12 in x 9.25 in x 5.3 in)
Controller Weight: 3.6 kg (8 lbs)
Pump Weight: 10.4 kg (23 lbs)
- Voltage/Frequency: 115VAC/50-60Hz
- VA rating: 300
- Fuse: .8 A (motor); 15 A (line)
Motor: brushless, DC, TENV (totally enclosed non ventilated).
*Maximum flow rate specifications are based on theoretical volume displacement; actual flow rates will vary depending on such factors as fluid viscosity, compressibility, and temperature. Minimum flow rates are stated per channel, maximum flow rates are stated with combined channels.
#1024 Piston seal assembly kit; includes one UHMW polyethylene seal, backup washer, and tools for installation.
#1187 Piston seal replacement kit; includes three UHMW polyethylene seals, backup washers..
#1373 Inlet valve assembly, cartridge-style, 1/8″ Swagelok style fitting.
#1374 Outlet valve assembly, cartridge-style, 1/8″ Swagelok style fitting.
#1381 Valve cartridge kit (rebuilds one inlet or one outlet valve).
#1034 1/4″ sapphire piston.
#1038 Includes inlet and outlet valve assemblies, cylinder, piston seals, and retainer. Piston not included. End Assembly
#5776 10 micron sintered stainless steel filter, with 60 cm long Teflon inlet tube and tube nut.
#2908 Retainer assembly.
#1041 Inlet/Outlet manifold for parallel operation of all channels on BBB pumps.
For additional parts, consult factory
Download product brochures and documentation from our Support page.